Salta al contenuto principale

Cricut Maker ベルトの交換

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Giapponese

Traduzione in corso passo 5

Passo 5
Cricut Maker Belt Replacement: passo 0, immagine 1 di 3 Cricut Maker Belt Replacement: passo 0, immagine 2 di 3 Cricut Maker Belt Replacement: passo 0, immagine 3 di 3
  • Remove the electrical tape from the connecting cable on the backside of the main motor.

  • Use the tip of a spudger or your fingernail to flip up the small locking flap.

  • Pull the cable out.

メインモーター裏側の接続ケーブルの電気テープを剥がします。

スパッジャー先端か指の爪を使って、小さなロック用フラップをめくります。

ケーブルを引き抜きます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.