Salta al contenuto principale

Sostituzione sportello anteriore Cricut Maker

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 4le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 9

Passo 9
Cricut Maker Front Door Replacement: passo 0, immagine 1 di 3 Cricut Maker Front Door Replacement: passo 0, immagine 2 di 3 Cricut Maker Front Door Replacement: passo 0, immagine 3 di 3
  • Remove a total of seven 10 mm screws from the underside of the door.

  • One side of the base has two 10mm screws.

  • The other side of the base has five 10 mm screws.

Rimuovi le sette viti da 10 mm dalla parte inferiore dello sportello.

Un lato della base ha due viti da 10 mm.

L'altro lato della base ha cinque viti da 10 mm.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.