Aggiusta le tue cose Community Store

Sustitución del Ventilador de CPU y del Disipador de Calor del Toshiba Tecra Z50-A

Inglese
Spagnolo

Prerequisiti Guida

Tutte le guide prerequisite devono essere tradotte prima che questa traduzione sia considerata completa.

Sustitución del Panel Trasero del Toshiba Tecra Z50-A

Sustitución de la Batería del Toshiba Tecra Z50-A

Informazioni Guida

= Fatto = Incompleto
    When your device is having difficulties cooling down, or if the fan is far too loud then it’s time for a replacement. Keep in mind for this guide you will need to know how to apply Thermal Paste to your device.
    This guide will show you how to replace the CPU fan and heat sink of the Toshiba Tetra Z50-A.
    The CPU fan blows and pulls air off the CPU, keeping it from over heating. This replacement may be needed to fix issues such as overheating, frequent crashing, error messages, or your device making unusual or loud noises. In some cases the CPU can be damaged or broken. Before using this guide, check the [[Toshiba Tecra Z50-A Troubleshooting|trouble shooting page|new_window=true]] for any other issues that might cause similar problems.
    Keep in mind for this guide you will need to know how to apply Thermal Paste to your device. Make sure to completely power of the device and disconnect any power sources before starting this guide.

      Passi guida

      Passo 1

      Retira los cuatro tornillos de 3 mm del disipador de calor con un destornillador Phillips #0.

      Passo 2

      Retira los dos tornillos de 4 mm del ventilador con un destornillador Phillips # 0

      Passo 3

      Retira el disipador de calor de la computadora portátil.

      Passo 4

      Tira hacia la parte inferior de la computadora portátil para desconectar el cable del ventilador de su conector en la placa base.

      Passo 5

      Levanta el ventilador y retíralo de la computadora portátil.

      I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.