Aggiusta le tue cose Community Store

Nintendo WaveBird Drahtloskontroller Oberteil austauschen

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Tedesco
Passo successivo

Traduzione in corso passo 1

Passo 1
Nintendo WaveBird Wireless Controller Front Panel Replacement: passo 0, immagine 1 di 2 Nintendo WaveBird Wireless Controller Front Panel Replacement: passo 0, immagine 2 di 2

  • Remove the eight 9 mm screws from the back panel using the Tri-point Y1 screwdriver.

  • During reassembly, firmly hold the panels of the controller together while replacing the screws so the panels do not separate.

Entferne die acht Y1 Tri-Wing Schrauben von der Gehäuserückseite.

Halte beim Zusammenbau die Gehäuseteile fest zusammen, während du die Schrauben hineindrehst.

-[* black] Remove the eight 9-mm Tri-Wing screws on the back panel with the Tri-wing Y1 screwdriver.
-[* icon_note] During reassembly, firmly hold the panels of the controller together while replacing screws so the panels don't separate.
+[* red] Remove the eight 9 mm screws from the back panel using the Tri-point Y1 screwdriver.
+[* icon_reminder] During reassembly, firmly hold the panels of the controller together while replacing the screws so the panels do not separate.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.