Salta al contenuto principale

Sostituzione gruppo struttura centrale Xbox Series X

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 17le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 5

Passo 5
Xbox Series X Center Chassis Assembly Replacement, Peel up the USB port cable: passo 0, immagine 1 di 2 Xbox Series X Center Chassis Assembly Replacement, Peel up the USB port cable: passo 0, immagine 2 di 2
Peel up the USB port cable
  • Gently peel the taped USB port ribbon cable off of the heatsink.

  • Depending on your model of Xbox, the adhesive may be on the underside of the cable. If so, use an iOpener or hair dryer to heat the cable.

Separa delicatamente il cavo a nastro della porta USB tenuto fermo con del nastro adesivo dal dissipatore.

[title] Peel up the USB port cable
[* black] Gently peel the taped USB port ribbon cable off of the heatsink.
+ [* icon_note] Depending on your model of Xbox, the adhesive may be on the underside of the cable. If so, use an [guide|25705|iOpener|new_window=true] or [guide|157348|hair dryer|new_window=true] to heat the cable.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.