Aggiusta le tue cose Community Store

Xbox Series X Netzteil ersetzen

Inglese
Tedesco

Prerequisiti Guida

Tutte le guide prerequisite devono essere tradotte prima che questa traduzione sia considerata completa.

Xbox Series X Rückseite ersetzen

Xbox Series X Lüfter ersetzen

Laufwerk entfernen

Xbox Series X zentrales Chassis ersetzen

Abschirmplatte und Elastikband entfernen

Informazioni Guida

= Fatto = Incompleto
    Use this guide to remove and replace the power supply in an Xbox Series X.
    If your Xbox doesn't power on or the light on the console doesn't light up, [[Xbox Series X Turns Off By Itself#Section_Malfunctioning_Power_Supply|your power supply may be faulty|new_window=true]].
    Before you begin, completely ***power down and unplug all cables*** from your console. Remember to follow general [link|https://www.ifixit.com/News/63909/what-is-esd|electrostatic discharge (ESD)|new_window=true] safety procedures while repairing the console.
      ***To reassemble your device, follow these instructions in reverse order.***
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Xbox%20Series%20X|Xbox Series X Answers community] for help.

      Passi guida

      Passo 1 — 10-Pin-Stromkabel entfernen.

      Greife und drücke die Halteklammer am 10-Pin-Stromkabel zusammen.

      Passo 2 — 2-Pin-Stromkabel entfernen

      Greife und drücke die Halteklammer am 2-Pin-Stromkabel zusammen.

      Passo 3 — Kabelführung öffnen

      Öffne die Klappe der Kabelführung des Stromkabels.

      Passo 4 — Schrauben des Netzteils lösen

      Entferne die vier Torx T8 Schrauben, die das Netzteil fixieren:

      Passo 5 — Netzteil entfernen

      Entferne das Netzteil.

      I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.