Salta al contenuto principale

Xbox Series X 中央筐体アセンブリ

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 3

Passo 3
Xbox Series X Center Chassis Assembly Replacement, Disconnect the power button cable: passo 0, immagine 1 di 3 Xbox Series X Center Chassis Assembly Replacement, Disconnect the power button cable: passo 0, immagine 2 di 3 Xbox Series X Center Chassis Assembly Replacement, Disconnect the power button cable: passo 0, immagine 3 di 3
Disconnect the power button cable
  • Use the pointed end of a spudger to depress the metal tab on the side of the power button cable's board connector.

  • With the metal tab depressed, use a pair of tweezers to pull up on the pull tab to disconnect the power button cable from the center chassis.

  • Pull only on the pull tab, not the cable itself.

  • Don't pull on the cable without depressing the metal tab, otherwise you risk damaging either the cable or the connector.

  • During reassembly, the cable should lightly "snap" into place when inserted.

スパッジャーの先端を使って、電源ボタンケーブルのボードコネクタ側面にあるメタル製タブを押します。

メタル製タブを押しながら、ピンセットを使ってプルタブを引き上げ、中央のシャーシから電源ボタンケーブルを外します。

ケーブル自体ではなく、プルタブのみを引っ張ります。

メタルタブを押さえずにケーブルを引っ張ると、ケーブルまたはコネクタを損傷する恐れがあります。

再組み立ての際に、ケーブルを差し込むと軽くカチッと装着音がします。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.