Aggiusta le tue cose Community Store

Xbox Series S ファンの交換

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Giapponese
Passo precedente Passo successivo

Traduzione in corso passo 2

Passo 2
Xbox Series S Fan Replacement, Disconnect the fan: passo 0, immagine 1 di 2 Xbox Series S Fan Replacement, Disconnect the fan: passo 0, immagine 2 di 2
Disconnect the fan

  • Flip the device over.

  • Take care when flipping the chassis over because the fan is now loose.

  • Use your fingers to pull and disconnect the fan connector from its motherboard socket.

  • Take care not to pull on the wires when disconnecting the fan to prevent breaking the connector.

  • This connector may be difficult to remove. A good method to remove it is to shimmy the connector up and out of its socket with a spudger.

  • You may be able to remove this connector without removing the power supply with a pair of needle-nose pliers.

ファンの接続を外します

デバイスを裏返します。

ファンがゆるまってシャーシを裏返す際はご注意ください。

指先を使って、マザーボードのソケットからファンのコネクタを引き抜いて外します。

ファンを取り外す際には、コネクターの破損を防ぐため、ワイヤ部分を引っ張らないようにご注意ください。

このコネクタは外しにくい場合があります。良いやり方はスパッジャーでコネクタを持ち上げて、ソケットから外す方法です。

ニードルノーズペンチを使えば、電源装置を外さずにこのコネクタを外すこともできます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.