Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 13
Passo 13
Remove the back cover
-
Lift the back cover slowly. Use opening picks to slice any remaining adhesive.
-
Remove the back cover.
-
This is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working.
-
Remove any adhesive chunks with a pair of tweezers or your fingers. Apply heat if you're having trouble separating the adhesive.
-
If you're using custom-cut adhesives, follow this guide.
-
If you're using double-sided tape, follow this guide.
| [title] Remove the back cover | |
| [* black] Lift the back cover slowly. Use opening picks to slice any remaining adhesive. | |
| [* black] Remove the back cover. | |
| - | [* icon_reminder] During reassembly, this is a good point to power on your phone and test all functions before you seal the back cover in place. Be sure to power your phone back down completely before you continue working. |
| - | [* icon_reminder] [guide|124003|Follow this guide|new_window=true] to replace the back cover perimeter adhesive before resealing your device. |
| + | [* icon_reminder] During reassembly: |
| + | [* black] This is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working. |
| + | [* black] Remove any adhesive chunks with a pair of [product|IF145-020|tweezers] or your fingers. Apply heat if you're having trouble separating the adhesive. |
| + | [* black] If you're using custom-cut adhesives, [guide|152862|follow this guide|new_window=true]. |
| + | [* black] If you're using double-sided tape, [guide|113604|follow this guide.|new_window=true] |
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.