Aggiusta le tue cose Community Store

三星 Galaxy S20 Plus 屏幕更换

Inglese
Cinese

Prerequisiti Guida

Tutte le guide prerequisite devono essere tradotte prima che questa traduzione sia considerata completa.

三星 Galaxy S20 Plus 后盖移除

三星 Galaxy S20 Plus 断开电池

三星盖乐世 S20 Plus 无线充电线圈更换

三星盖乐世 S20 Ultra 扬声器更换

Informazioni Guida

= Fatto = Incompleto
    Follow this guide to replace the screen assembly for the Samsung Galaxy S20 Plus. The display glass, OLED panel, and digitizer comprise the screen assembly and will need to be replaced together.
    '''***Note:'''*** Some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires you to transplant all of your phone's internals and install a new battery. Make sure you have the correct part before starting this guide.
    '''***There is a significant chance that you may break the unreinforced and fragile display panel during this procedure.'''*** If you plan on reusing the screen assembly, be sure to apply plenty of heat and be extremely careful during the prying stage.
    You'll need replacement adhesive in order to complete this repair.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''***To reassemble your device, follow the above steps in reverse order.***

      After you      '''ve completed the repair, ++[guide|152254|follow this guide|new_window=true]++ to test your repair.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/Samsung%20Galaxy%20S20%20Plus|Answers community] for troubleshooting help.

      Passi guida

      Passo 1 — 断开显示屏电缆

      使用撬棒撬起并断开显示屏电缆。

      Passo 2 — 粘合剂提示

      在接下来的几个步骤中，你将加热并分离设备周围的黑色粘合剂。

      Passo 3 — 分离周围的粘合剂

      加热 iOpener 并将其应用到显示屏的顶部边缘两分钟。

      Passo 4

      将吸盘放在显示屏玻璃上，并尽可能靠近顶部边缘的中心。

      Passo 5

      将第二个三角撬片插入相同的间隙中，然后将其滑动到显示屏的左上角以切片胶粘剂。

      Passo 6

      将第三个三角撬片插入中心间隙，然后将其滑动到显示屏的右上角以切片胶。

      Passo 7

      将中心拨片进一步滑入设备的顶部边缘，以切掉听筒和前置摄像头周围的粘合剂。

      Passo 8

      将加热的 iOpener 施加到显示屏的右边缘两分钟。

      Passo 9

      将另一个三角撬片插入显示屏右上角的间隙。

      Passo 10

      将加热的iOpener施加到显示屏的左边缘两分钟。

      Passo 11

      在屏幕左上角的间隙中插入一个三角撬片。

      Passo 12 — 分开内部粘合剂

      在此步骤中，你将在屏幕后面涂抹异丙醇，以将透明的粘合剂向设备的底部中央释放。

      Passo 13

      在屏幕的顶部边缘下方慢慢插入撬棒，以分离透明胶。

      Passo 14 — 移除屏幕

      从框架上卸下显示屏。

      Passo 15 — 移除旧的粘合剂

      使用镊子去除框架上所有残留的粘合剂。

      I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.