Aggiusta le tue cose Community Store

2018年款带 Touch Bar 的13寸 MacBook Pro 电池更换

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Cinese
Passo precedente

Traduzione in corso passo 22

Passo 22
MacBook Pro 13" Touch Bar 2018 Battery Replacement, Battery installation: passo 0, immagine 1 di 3 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Battery installation: passo 0, immagine 2 di 3 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Battery installation: passo 0, immagine 3 di 3
Battery installation

  • Double-check the fit and alignment of your new battery before sticking it down.

  • Be mindful of the battery data cable and make sure it doesn't get pinched or trapped under the battery board.

  • If your battery came with adhesive pre-installed on the bottom, flip it over and carefully peel away the liner to expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as Tesa 61395 to keep your battery in place.

  • Carefully position the battery and set it into place.

  • Place the battery close to the logic board so the trackpad cable can reach its connector.

  • Press and hold each cell firmly for 5-10 seconds to secure it to the lower case.

电池安装

放下之前，请仔细检查新电池的安装和对准情况。

请注意电池数据线，并确保它不会被夹在电池板上。

如果你的电池底部预装有胶粘剂，请将其翻转过来并小心地剥离内衬以露出胶粘剂。如果电池没有粘合剂，请使用薄的双面胶带（例如Tesa 61395）将电池固定到位。

小心放置电池并将其放置到位。

牢牢按住每个电池单元格5-10秒钟，以将其固定到底部外壳。

[title] Battery installation
[* icon_reminder] Double-check the fit and alignment of your new battery before sticking it down.
[* black] Be mindful of the battery data cable and make sure it doesn't get pinched or trapped under the battery board.
[* black] If your battery came with adhesive pre-installed on the bottom, flip it over and carefully peel away the liner to expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as [product|IF317-072-4|Tesa 61395|new_window=true] to keep your battery in place.
[* black] Carefully position the battery and set it into place.
+ [* icon_note] Place the battery close to the logic board so the trackpad cable can reach its connector.
[* black] Press and hold each cell firmly for 5-10 seconds to secure it to the lower case.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.