Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 21

Passo 21
Before you remove the battery, ensure that the battery connector is sufficiently raised and not in the way of the battery board. Remove the battery. Before installing a new battery, remove all remaining adhesive from the MacBook Pro's case.
Remove the battery
  • Before you remove the battery, ensure that the battery connector is sufficiently raised and not in the way of the battery board.

  • Remove the battery.

  • Before installing a new battery, remove all remaining adhesive from the MacBook Pro's case.

  • Peel off any large strips of adhesive using tweezers or gloved fingers.

  • Scrape away any remaining chunks of adhesive with a plastic tool, and clean the underlying areas with adhesive remover or isopropyl alcohol. Wipe in one direction (not back and forth) until the chassis is clean and ready for your new battery.

  • This can take quite a bit of work, so be patient.

  • When you're done, carefully remove the protective tape from the speakers.

卸下电池之前,请确保电池连接器已充分抬起,并且不妨碍电池板。

取出电池。

在安装新电池之前,请从MacBook Pro的外壳中清除所有残留的粘合剂。

用镊子或戴手套的手指将所有大条胶粘剂剥离。

用塑料工具刮掉所有残留的粘合剂块,然后用除胶剂或异丙醇清洁下面的区域。沿一个方向擦拭(不要来回擦拭),直到清洁机箱并准备好装入新电池为止。

这可能需要大量工作,因此请耐心等待。

完成后,小心地从扬声器上取下保护带。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.