Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 6le guide che includono questo passo.
Traduzione in corso passo 2
Passo 2
-
Remove all 4 screws attached to the battery with a small Phillips head screwdriver.
-
Each screw on the back is M2 x 1.7mm
-
After the screws are taken out, remove the battery. The battery is the large black rectangle at the bottom of the area.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.