MiTM Pressure Washers CA2703HDHB1 2017 Pump Assembly Replacement

Inglese

Italiano

Traduzione in corso passo 6

Passo 6

Re-attach the motor

Re-assembly note: To re-attach the motor:
Press the axle key into the notch on the engine axle.
Align the pump shaft with the keyed axle. You may have to rotate the pump to do so.
Slide the pump onto the axle until the coupling surfaces touch.
If there is a significant gap between the pump and engine, pull the pump off, and re-set the axle key.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.