MiTM Pressure Washers CA2703HDHB1 2017 Pump Assembly Replacement

Inglese

Italiano

Traduzione in corso passo 3

Passo 3

Remove the mounting bolts

Use a 1/2" wrench to remove the four 30 mm long bolts which mount the pump to the engine.
You should still have the support block under the pump assembly to help bear the pump's weight.
Re-assembly tip: note how the washers are stacked when reinstalling the bolts.
Replace the lock washers with new ones.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.