Salta al contenuto principale

Smontaggio Microsoft Surface Laptop 3

Inglese
Italiano

Traduzione in corso passo 8

Passo 8
Microsoft Surface Laptop 3 (15-inch) Teardown: passo 0, immagine 1 di 3 Microsoft Surface Laptop 3 (15-inch) Teardown: passo 0, immagine 2 di 3 Microsoft Surface Laptop 3 (15-inch) Teardown: passo 0, immagine 3 di 3
  • We skipped ahead a little, but you can actually remove this display as soon as the device is open.

  • Four flex cables wrap over the hinge and tuck into the back of the frame, where they're covered by some prickly metal shields. Prying up and wiggling out the shields without damaging the cables is somewhat of a nail-biter.

  • These cables aren't modular, so if you cut one, you'll be pulling a MacBook Pro and replacing the entire display.

  • With the shields aside, and a few more screws dispatched, the display lifts away easily.

  • We're close to freeing the motherboard at this point, but we're slowed down by screws hidden underneath more shields.

Siamo saltati un po' avanti, ma effettivamente si può rimuovere questo schermo non appena il dispositivo viene aperto.

Quattro cavi flex si avvolgono attorno alla cerniera e quindi si infilano sul retro del telaio, dove sono coperti da alcune irritabili schermature metalliche. Far leva sugli schermi ed estrarli senza danneggiare i cavi è qualcosa di abbastanza snervante.

Questi cavi non sono modulari, quindi se ne taglierai uno, condividerai il fato con un MacBook Pro e dovrai sostituire l'intero display.

Una volta tolte le schermature e fatta fuori qualche altra vite, lo schermo viene via senza difficoltà.

A questo punto siamo vicini a liberare la scheda madre, ma ci rallentano alcune viti nascoste sotto altre schermature.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.