Aggiusta le tue cose Community Store

iPad Mini 3 Wi-Fi LCDシールドプレートの交換

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Giapponese
Passo precedente Passo successivo

Traduzione in corso passo 24

Passo 24
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 1 di 2 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 2 di 2

  • Be very careful with this step. Take your time and ensure the adhesive is hot and soft, and that you've been through all of the adhesive with an opening pick. Don't be afraid to stop and reheat.

  • At the top of the iPad opposite the home button, you should have a pick lodged into each corner. Twist the picks to lift the glass slightly, separating the last of the adhesive along all four edges.

  • If you encounter a significant amount of resistance, stop twisting. Leave the picks in place, reheat, and reapply the iOpener to the problem areas, and run a pick through the sticking point one more time.

この手順は慎重に行ってください。ゆっくりと時間をかけて、開口ピックで接着剤が温まって柔らかいことを確認してください。固くなっている場合は、中断して再度温めてください。

iPad上部、ホームボタンの反対側に、それぞれの角にピックが刺さっているはずです。ピックをひねってガラスを少し持ち上げ、4つのエッジに沿って最後の接着剤を分離します。

接着剤にかなりの抵抗がある場合は、捻る作業を中断します。ピックはそのままにして、再加熱し、問題のある部分にiOpenerをもう一度当て、固着した部分にもう一度ピックを通します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.