Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 5

Passo 5
Slide the opening tool back and forth across the bottom edge of the phone, cutting through the adhesive securing the rear glass panel. Once the adhesive is cut and the gap is wide enough, insert an opening pick into the gap to keep the adhesive from re-bonding. Remove the opening tool. Once the adhesive is cut and the gap is wide enough, insert an opening pick into the gap to keep the adhesive from re-bonding. Remove the opening tool.
  • Slide the opening tool back and forth across the bottom edge of the phone, cutting through the adhesive securing the rear glass panel.

  • Once the adhesive is cut and the gap is wide enough, insert an opening pick into the gap to keep the adhesive from re-bonding. Remove the opening tool.

Lasse das Öffnungswerkzeug an der Unterkante hin und her gleiten, damit die Klebeverbindung der Glasscheibe aufgetrennt wird.

Wenn der Kleber aufgeschnitten und der Spalt breit genug ist, dann setze ein Plektrum in den Spalt hinein, damit sich der Kleber nicht wieder verbinden kann. Entferne das Öffnungswerkzeug.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.