Aggiusta le tue cose Community Store

右側ジョイコンのジョイスティックの交換

Torna alla Guida
Inglese
Giapponese
Passo precedente Passo successivo

Traduzione in corso passo 13

Passo 13
Right Joy-Con Joystick Replacement, Remove the joystick: passo 0, immagine 1 di 3 Right Joy-Con Joystick Replacement, Remove the joystick: passo 0, immagine 2 di 3 Right Joy-Con Joystick Replacement, Remove the joystick: passo 0, immagine 3 di 3
Remove the joystick

  • Carefully remove the joystick from its housing.

  • There is a thin black gasket around the hole where the joystick pokes through the Joy-Con. Do your best not to disturb this gasket as you remove the joystick!

  • Once the Joy-Con is fully reassembled, connect it to your Nintendo Switch and calibrate the new joystick. Additionally, you may need to power cycle your Switch by holding down the power button for 10-15 seconds until it turns off, then turning it back on.

Joystickを取り出します

Joystickを慎重に筐体から取り出します。

JoystickがJoy-Conを突き抜ける穴の周辺に、薄くて黒いガスケットが付いています。 Joystickを外すときに、このガスケットにダメージを与えないよう最善を尽くしてください！

Joy-Conの再組立てができたら、Nintendo Switch本体に繋げて、新しいJoystickをキャリブレーションしてください。さらに、Switch本体をオフになるまで、電源ボタンを10-15秒間長押しします。それから、再び電源を入れてください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.