Salta al contenuto principale

Sostituzione Joy-Con joystick destro

Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Right Joy-Con Joystick Replacement, Open the case: passo 0, immagine 1 di 2 Right Joy-Con Joystick Replacement, Open the case: passo 0, immagine 2 di 2
Open the case
  • Open the Joy-Con like a book, with the charging rail facing away from you.

  • Don’t try to fully remove the back panel yet. There are still two cables connecting the charging rail to the motherboard.

  • During reassembly, make sure the SL/SR cable is lightly bent under the battery compartment before clipping the two halves of the joy‑con together. Otherwise, you might crease the cable and damage it.

Apri il Joy-Con come se fosse un libro, con il binario della ricarica rivolto lontano da te.

Non cercare già ora di rimuovere completamente il pannello posteriore. Ci sono ancora due cavi che collegano il binario di ricarica alla scheda madre.

In fase di rimontaggio, prima di riconnettere le due metà del Joy-Con, assicurati che il cavo SL/SR si pieghi un po' sotto l'alloggio della batteria, o il cavo potrebbe piegarsi male e danneggiarsi.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.