Aggiusta le tue cose Community Store

Joy-Con 左侧摇杆更换

Torna alla Guida
Inglese
Cinese
Passo precedente Passo successivo

Traduzione in corso passo 12

Passo 12
Left Joy-Con Joystick Replacement: passo 0, immagine 1 di 2 Left Joy-Con Joystick Replacement: passo 0, immagine 2 di 2

  • Carefully remove the joystick from its housing.

  • There is a thin black gasket around the hole where the joystick pokes through the Joy-Con. Do your best not to disturb this gasket as you remove the joystick!

  • Once the Joy-Con is fully reassembled, connect it to your Nintendo Switch and calibrate the new joystick. Additionally, you may need to power cycle your Switch by holding down the power button for 10-15 seconds until it turns off, then turning it back on.

小心地从外壳上取出操纵杆。

在外壳上有一个薄的黑色垫圈， 移除操纵杆时，请尽量不要触碰到此垫圈！

待重新组装好Joy-Con后，别忘了插入Switch并校准新的控制器。此外，你可能需要重启你的switch，按下电源按钮10-15秒，直到它关闭，然后再打开你的开关。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.