Salta al contenuto principale

Nintendo Switch Vervanging van het achterste paneel

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Olandese

Traduzione in corso passo 1

Passo 1
Nintendo Switch Rear Panel Replacement, Release the Joy Con controller locking tabs: passo 0, immagine 1 di 3 Nintendo Switch Rear Panel Replacement, Release the Joy Con controller locking tabs: passo 0, immagine 2 di 3 Nintendo Switch Rear Panel Replacement, Release the Joy Con controller locking tabs: passo 0, immagine 3 di 3
Release the Joy Con controller locking tabs
  • Before you begin this repair, make sure the device is completely powered off.

  • Press and hold down the small round button on the back of the Joy Con controller.

  • While you hold down the button, slide the controller upward.

Zorg dat console en de controllers volledig zijn uitgeschakeld voordat je met deze reparatie begint.

Druk de kleine ronde knop aan de achterkant van de Joy Con-controller in en houd deze ingedrukt.

Schuif je controller, terwijl je de knop nog steeds ingedrukt houdt, omhoog.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.