Salta al contenuto principale

HP EliteBook 840 G5 Bodendeckel austauschen

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 1

Passo 1
HP EliteBook 840 G5 Back Cover Replacement: passo 0, immagine 1 di 2 HP EliteBook 840 G5 Back Cover Replacement: passo 0, immagine 2 di 2
  • Use a Phillips #1 screwdriver to undo the five screws. The top three screws are 10 mm and the two side screws are 7 mm.

  • Unscrew the bottom three screws using the same screwdriver.

  • The bottom Phillips #1 screws don't remove from the back plate, but do need to be unscrewed.

  • Some models have a slightly different screw configuration, shown in the second photo.

Entferne die fünf Kreuzschlitzschrauben #1. Die drei oberen sind 10 mm lang, die beiden seitlichen 7 mm.

Löse die drei unteren Kreuzschlitzschrauben #1.

Diese drei Schrauben müssen nicht entfernt, sondern nur gelöst werden.

Manche Modelle haben eine etwas andere Schraubeneinteilung, wie auf dem 2. Foto.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.