Insert an opening pick into the heated edge of the phone, between the plastic frame and the display.
The pick should slide underneath the plastic and remain above the copper colored shielding.
If you can see the pick through front glass, the pick is riding on top of the display panel. Pull the pick out, angle it so that the point aims more towards the plastic frame side, and try again.
Keep in mind that the display cable threads through the midframe just above the midpoint of the right edge. It may interfere with your cutting if the pick is too deep.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.
Riga successiva
Riga precedente
Inserisci una nuova riga sotto
Inserisci una nuova riga sopra
Crea rientro riga corrente
Riduci rientro riga corrente
Elimina riga corrente
Vai al passo successivo.
Vai al passo precedente.
Apri aiuto
