iPad 6 Wi-Fi Front Panel Assembly Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese

Olandese

Traduzione in corso passo 3

Passo 3

Use a the flat end of a spudger or a fingernail to carefully pop the two digitizer cable connectors straight up from their sockets.
To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.
During reassembly, make sure that these connectors are completely seated in their sockets, or you may encounter display issues.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.