Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 3

Passo 3
Use a the flat end of a spudger or a fingernail to carefully pop the two digitizer cable connectors straight up from their sockets. To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board. During reassembly, make sure that these connectors are completely seated in their sockets, or you may encounter display issues.
  • Use a the flat end of a spudger or a fingernail to carefully pop the two digitizer cable connectors straight up from their sockets.

  • To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.

  • During reassembly, make sure that these connectors are completely seated in their sockets, or you may encounter display issues.

Utilisez le bout plat ce votre spatule ou bien votre ongle pour détacher avec précaution les connecteurs des deux nappes de la vitre tactile de leurs prises.

Pour éviter toute détérioration de l'iPad, faites levier seulement sur les connecteurs et non sur leurs prises sur la carte mère.

Pendant le remontage, assurez-vous que ces connecteurs sont complètement logés dans leurs prises, ou vous pourriez rencontrer des problèmes d'affichage.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.