Aggiusta le tue cose Community Store

Sostituzione schermo Motorola Moto Z2 Play

Inglese
Italiano

Prerequisiti Guida

Tutte le guide prerequisite devono essere tradotte prima che questa traduzione sia considerata completa.

Rimozione dello schermo Motorola Moto Z2 Play

Informazioni Guida

= Fatto = Incompleto
    This guide details how to replace a broken or non-responsive screen on your Motorola Moto Z2 Play. This replacement guide is classified as moderate because of the tools needed. It has a straight-forward process and should be completed by following the steps in order. To replace the screen, you need the following tools: a plastic opening tool, a tweezer, a heat gun, a plastic card, and a suction cup. If your phone is cracked, you need to obtain a strong adhesive tape for step three.
    Use this guide to remove or replace the screen on your Motorola Moto Z3 Play.
    Before you begin, download the [link|https://www.motorola.com/us/rescue-and-smart-assistant/p|Rescue and Smart Assistant|new_window=true] app to backup your device and diagnose whether your problem is software or hardware related.
    ***Warning***: Because of the strong adhesive securing the display, minimal clearance for inserting your tools, and high heat required, there's a good chance of accidentally damaging the display when removing it. If you're replacing the display anyway, then you don't have to worry—but if you intend to re-use the display, take serious care when heating and inserting tools to separate the display from the rest of the device.
      * To reassemble your device, follow these instructions in reverse order.
      * Ensure that the adhesive lining the frame is flat and flush. If the adhesive was damaged or skewed during the opening process, you may need to replace it.
      Compare your new replacement part to the original part—you may need to transfer any remaining components or remove adhesive backings from the new part before installing.
      '''To reassemble your device, follow the above steps in reverse order.'''
      Take your e-waste to an R2 or e-Stewards certified recycler.
      Repair didn’t go as planned? Check out our Answers community for troubleshooting help.

      Passi guida

      Passo 1

      Passo 2

      Passo 3

      I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.