Salta al contenuto principale

Smontaggio Nintendo Switch

Inglese
Italiano

Traduzione in corso passo 21

Passo 21
Nintendo Switch Teardown: passo 0, immagine 1 di 3 Nintendo Switch Teardown: passo 0, immagine 2 di 3 Nintendo Switch Teardown: passo 0, immagine 3 di 3
  • Teardown Update: Just to make sure we were getting our fill of secret sauce, we popped the top off the haptic feedback motor, a linear resonant actuator (LRA) that powers Switch's HD Rumble.

  • These LRAs look very similar to the ones we pulled out of the Oculus Touch controllers, HTC Vive, and the Steam Controller.

  • We took a second to pop open a Oculus Touch haptic motor and it seems to be internally identical to this one.

  • On the inside, this vibration motor seems fairly standard. It's essentially a voicecoil installed in a moving mass assembly, flanked by a pair of powerful magnets.

  • However, it's interesting that this LRA seems to vibrate along its short axis, while many haptic feedback motors that we've seen vibrate along their long axis.

Aggiornamento Smontaggio: giusto per essere sicuri di non lasciare nulla di intentato, abbiamo tolto il coperchio al motore di feedback aptico, un attuatore risonante lineare (LRA) che fa vibrare l'HD Rumble.

Questi LRA somigliano molto quelli che abbiamo tirato fuori dai controller Oculus Touch, dall'HTC Vive e dallo Steam Controller.

Abbiamo dedicato qualche istante ad aprire un motore aptico dell'Oculus Touch e ci è sembrato internamente identico a questo.

All'interno, questo motore di vibrazione sembra di tipo standard. È essenzialmente una bobina di tipo voicecoil installata in un gruppo con una massa mobile, con un potente magnete a ogni estremità.

È comunque interessante notare che questa LRA sembra vibrare lungo il suo asse più corto, mentre molti motori di feedback aptico che abbiamo visto finora sembrano vibrare longitudinalmente.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.