Salta al contenuto principale

Sostituzione batteria iPhone 6

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 4

Passo 4
iPhone 6 Battery Replacement, Unstick the battery from the case: passo 0, immagine 1 di 2 iPhone 6 Battery Replacement, Unstick the battery from the case: passo 0, immagine 2 di 2
Unstick the battery from the case
  • If the battery remains stuck to the rear case, prepare an iOpener or use a hair dryer to heat the rear case directly behind the battery. It should be slightly too hot to touch comfortably.

  • Then, use a plastic opening tool to gently lift the battery.

  • Overheating the iPhone may ignite the battery.

  • Alternatively, if the battery remains stuck to the rear case, flip the iPhone back over and thread a piece of dental floss or strong string behind the battery. Then, slowly pull back and forth in a sawing motion to separate the adhesive.

  • A stronger alternative to floss is an unwound guitar string, such as a 0.009 E string from a 12-string set.

Se ancora non riesci a rimuovere la batteria, prepara un iOpener o usa un asciugacapelli per scaldare direttamente il retro del telefono nella posizione della batteria. Portalo ad una temperatura appena troppo calda da toccare.

Quindi usa uno strumento di apertura in plastica per sollevare delicatamente la batteria.

Il surriscaldamento dell'iPhone potrebbe causare l'incendio della batteria.

In alternativa, se la batteria ancora non si stacca dal case posteriore, girare di nuovo l'iPhone e inserisci un filo interdentale o uno spago sottile e robusto sotto la batteria. Poi muovili avanti e indietro, come fossero un seghetto, per separare l'adesivo.

Un'alternativa più robusta del filo interdentale è una corda da chitarra non ritorta, come la Mi cantino di un set da 12 corde.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.