Salta al contenuto principale

iPhone 15 Plus Back Glass Opening

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 4

Passo 4
iPhone 15 Plus Back Glass Opening, Insert an opening pick: passo 0, immagine 1 di 3 iPhone 15 Plus Back Glass Opening, Insert an opening pick: passo 0, immagine 2 di 3 iPhone 15 Plus Back Glass Opening, Insert an opening pick: passo 0, immagine 3 di 3
Insert an opening pick
  • Use a hair dryer or heat gun to heat the bottom edge of the back glass until it's hot to the touch.

  • Be careful not to heat the phone hotter than this—the battery is susceptible to heat damage.

  • Wait up to a minute for the adhesive to separate and a gap to form between the back glass and the frame.

  • If a gap doesn't appear after one minute, apply more heat and rotate the handle a quarter turn. Let the Anti-Clamp and time do the work for you.

  • Insert an opening pick into the gap.

  • Remove the Anti-Clamp using the pull tabs on the suction cups.

  • Skip the next two steps.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.