Corsair One i145 M.2 NVME SSD Replacement

Torna alla Guida

Inglese

Italiano

Passo precedente Passo successivo

Traduzione in corso passo 2

Passo 2

Corsair One i145 M.2 NVME SSD Replacement, Open Side Panel: passo 0, immagine 1 di 3

Corsair One i145 M.2 NVME SSD Replacement, Open Side Panel: passo 0, immagine 2 di 3

Corsair One i145 M.2 NVME SSD Replacement, Open Side Panel: passo 0, immagine 3 di 3

Open Side Panel

When opening the panel, and resting the panel on the table, be careful not to put stress on the tubing connected to the heatsink attached to the panel.
Disconnect the top assembly/fan power connector from its housing and remove it.
Look down into the unit and locate the graphics card. Orientate the unit so that you are opening the side that contains the graphics card.
Remove the two screws from that side.
As the panel is hooked in from the bottom and the water cooling tubes from the graphics card are attached to the panel with the radiator, take care in pulling the top part of the panel towards you like you are opening a mailbox and let the panel rest flat on the table.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.