Salta al contenuto principale

Rimozione dello schermo

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 7

Passo 7
Screen Removal, Insert an opening pick: passo 0, immagine 1 di 3 Screen Removal, Insert an opening pick: passo 0, immagine 2 di 3 Screen Removal, Insert an opening pick: passo 0, immagine 3 di 3
Insert an opening pick
  • Once the screen is warm to the touch, apply a suction handle to the bottom edge of the screen.

  • If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

  • Lift the screen including its safety frame with the suction handle to create a small gap between the screen and the phone assembly.

  • Depending on the age of your phone, this may be difficult. If you're having trouble, apply more heat to the bottom edge and try again.

  • Insert an opening pick into the gap.

Una volta che lo schermo è caldo al tatto, applica una ventosa sul bordo inferiore dello schermo.

Se il display è gravemente incrinato, coprirlo con uno strato di nastro adesivo trasparente può consentire alla ventosa di aderire. In alternativa, al posto della ventosa è possibile utilizzare un nastro molto resistente. Se tutto il resto fallisce, puoi incollare la ventosa allo schermo rotto con la supercolla.

Solleva lo schermo, inclusa la cornice di sicurezza, con la ventosa per creare un piccolo spazio tra lo schermo e il gruppo del telefono.

A seconda dell'età del tuo telefono, questo potrebbe essere difficile. Se riscontri problemi, applica più calore sul bordo inferiore e riprova.

Inserisci un plettro di apertura nella fessura.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.