Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Parti

Nessuna parte specificata.

  1. Remove two 3.7 mm T5 screws from the back of the logic board.
    • Remove two 3.7 mm T5 screws from the back of the logic board.

  2. Kit per Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits

    Kit per Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits
  3. To avoid damaging its socket, do not lift the end of the AirPort/Bluetooth Card excessively. Lift the end of the AirPort/Bluetooth Card up slightly and pull it straight out of its socket on the logic board. When reinstalling the card, be sure it is properly seated before reinstalling its retaining screw.
    • To avoid damaging its socket, do not lift the end of the AirPort/Bluetooth Card excessively.

    • Lift the end of the AirPort/Bluetooth Card up slightly and pull it straight out of its socket on the logic board.

    • When reinstalling the card, be sure it is properly seated before reinstalling its retaining screw.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

iFixit Membro di iFixit

Community

107 Membri

10.230 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 53