Introduzione
Use this guide to replace the iSight camera.
Cosa ti serve
-
Attrezzo utilizzato in questo passaggio:iMac Intel 21.5" Cardboard Service Wedge$4.99
-
Attrezzo utilizzato in questo passaggio:Plastic Cards$2.99
-
Starting from the top right corner of the iMac, wedge a plastic card between the display and frame.
-
-
-
-
Use the tip of a spudger to flip down the metal retaining bracket on the camera cable.
-
-
-
Remove the two 4.3 mm T5 Torx screws securing the camera board to the top of the rear enclosure.
-
To reassemble your device, follow these instructions in reverse and use our Adhesive Strips Guide to reattach the display glass.
To reassemble your device, follow these instructions in reverse and use our Adhesive Strips Guide to reattach the display glass.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.