Aggiusta la tua roba Comunità Store

iLive IKBC384S FM/AM Antenna Replacement

Introduzione

This is a guide to help replace the FM/AM antenna for the iLive IKBC384S.

Cosa ti serve

  1. iLive IKBC384S FM/AM Antenna Replacement, Top Cover: passo 1, immagine 1 di 2 iLive IKBC384S FM/AM Antenna Replacement, Top Cover: passo 1, immagine 2 di 2

    • Make sure you remove all seven 3 mm screws before proceeding to the next step.

    Modifica

  2. iLive IKBC384S FM/AM Antenna Replacement: passo 2, immagine 1 di 2 iLive IKBC384S FM/AM Antenna Replacement: passo 2, immagine 2 di 2

    • Use iOpener or heat gun on all sides except the front.

    Modifica

  3. iLive IKBC384S FM/AM Antenna Replacement: passo 3, immagine 1 di 2 iLive IKBC384S FM/AM Antenna Replacement: passo 3, immagine 2 di 2

    • Be cautious when taking the top of the device off there may still be some adhesive stuck to device.

    • The top of the device will be very difficult to remove because of the adhesive holding it together.

    Modifica

  5. iLive IKBC384S FM/AM Antenna Replacement, FM/AM Antenna: passo 4, immagine 1 di 2 iLive IKBC384S FM/AM Antenna Replacement, FM/AM Antenna: passo 4, immagine 2 di 2

    • Remove all four screws(13.5 mm in length) that are securing the disk drive.

    Modifica

  6. iLive IKBC384S FM/AM Antenna Replacement: passo 5, immagine 1 di 2 iLive IKBC384S FM/AM Antenna Replacement: passo 5, immagine 2 di 2

    • Unplug the ribbon cable connected to the motherboard that stems from the disc drive.

    • Also, disconnect the two power connectors from the motherboard.

    • Once you have removed the ribbon cables and two connectors on the motherboard the disk drive can be removed.

    Modifica

  7. iLive IKBC384S FM/AM Antenna Replacement: passo 6, immagine 1 di 1

    • After removing the top of the device, locate the screws on the motherboard. Gently unscrew all four of the 3.5mm screws on the motherboard.

    Modifica

  8. iLive IKBC384S FM/AM Antenna Replacement: passo 7, immagine 1 di 2 iLive IKBC384S FM/AM Antenna Replacement: passo 7, immagine 2 di 2

    • Desolder the antenna at the contact point.

    • Check out this awesome guide for soldering and desoldering tips.

    Modifica

  9. iLive IKBC384S FM/AM Antenna Replacement: passo 8, immagine 1 di 2 iLive IKBC384S FM/AM Antenna Replacement: passo 8, immagine 2 di 2

    • Place iOpener on antenna for approximately 5 minutes

    Modifica

  10. iLive IKBC384S FM/AM Antenna Replacement: passo 9, immagine 1 di 1

    • Lift up and remove all of the antenna.

    • The antenna will be glued down all the way around the radio

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Tracy Walts

Membro da: 03/21/17

201 Reputazione

2 Guide realizzate

Distintivi: 5

+2 altri distintivi

Team

Texas Tech, Team S46-G6, Bennett Spring 2017 Membro di Texas Tech, Team S46-G6, Bennett Spring 2017

TTU-BENNETT-S17S46G6

3 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 680