Introduzione

Install an original Airport 802.11b card internally.

Use a coin to rotate the battery locking screw 90 degrees clockwise.
  • Use a coin to rotate the battery locking screw 90 degrees clockwise.

  • Lift the battery out of the computer.

Aggiungi Commento

Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.
  • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  • If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw 180 degrees in either direction and try again.

  • Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area.

Aggiungi Commento

  • Push the wire clasp toward the Airport card and pull it up to free it from the RAM shield.

Aggiungi Commento

  • Grasp the clear plastic tab on the Airport card and pull toward the right.

Aggiungi Commento

  • Hold the Airport card in one hand and use your other hand to remove the antenna cable.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 16 persone hanno completato questa guida.

Documenti Allegati

iRobot

Membro da: 24/09/2009

1 Reputazione

621 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 12

Tutti i Tempi: 21,172