Modifiche al passo #1
Modifica di Michael Rinaldi —
Modifica approvata da Michael Rinaldi
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] To remove the motherboard, you need to disconnect all components that are connected to the motherboard by a ribbon cable. |
|---|---|
| - | [* |
| + | [* black] To remove the motherboard, you need to first disconnect all components that are connected to the motherboard by a ribbon cable. |
| + | [* icon_note] The component that you ***MUST*** disconnect first is the battery to prevent any power that might be stored in the the computer even if it is shutdown. |
| [* black] The ribbon cable for the battery that is connected to the motherboard is outlined in the first image. Use your plastic opening tool to lift the cable out from the motherboard. | |
| - | [* black] Continue disconnecting the ribbon cable of the other 7 components that are connected to the motherboard. The next image shows the location of these connections and the proceeding one shows an example on how to disconnect them. You can use your plastic opening tool or finger nail to disconnect the cables. Work from left to right from the battery. |
| + | [* black] Continue disconnecting the ribbon cable of the other 7 components that are connected to the motherboard. The next image shows the location of these connections and the proceeding one shows an example on how to disconnect them. You can use your plastic opening tool or finger nail to disconnect the cables. |
| + | [* icon_note] You can work from left to right from the battery to ensure no cables are missed. |