|
Introduction |
| Use this guide to replace the rear-facing camera assembly in an iPhone 14 Plus. | | | This guide was created using the ***A2886*** (international) model. If you're fixing a different iPhone 14 Plus model, there may be some visual discrepancies, but the procedure should be the same. | | | ***Note***: On iOS 18 and newer, you can calibrate new, genuine camera modules using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true]. | | | You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating. |
|
|
Conclusion |
| If possible, turn on your device and test your repair before installing new adhesive and resealing. | | | Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing. | | | ***To reassemble your device, follow these instructions in reverse order.*** | | | After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts. | | | Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. | | | Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+14+Plus|Answers community] for help. |
|