Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Zeki TBQG884B Motherboard Replacement

Introduzione

This is a guide for replacing the motherboard of your Zeki device.

First, to reach the motherboard, remove the plastic backing, then the battery, and lastly the camera.

After replacing the motherboard, the device will need to be reassembled in the opposite order

Cosa ti serve

  1. Zeki TBQG884B Motherboard Replacement, Rear Case: passo 1, immagine 1 di 2 Zeki TBQG884B Motherboard Replacement, Rear Case: passo 1, immagine 2 di 2

    • Remove the two screws from the end of the device where the ports are located using a Phillips #1 screwdriver.

    Traduci

  2. Zeki TBQG884B Motherboard Replacement: passo 2, immagine 1 di 1

    • Place the tablet down so that the screen is facing away from you.

    • Insert the tip of your opening tool into the small gap between the gray and white plastic covering. Pry it open and you should hear the clips opening up.

    • Gently work your way around the perimeter of the tablet's edge.

    Traduci

  3. Zeki TBQG884B Motherboard Replacement: passo 3, immagine 1 di 2 Zeki TBQG884B Motherboard Replacement: passo 3, immagine 2 di 2

    • Remove the back cover

    • Remove any tape on the speaker and detach the speaker from the back plate.

    • The speaker is connected to the motherboard by two soldered wires. Don't break them when you remove the speaker.

    Traduci

  4. Zeki TBQG884B Motherboard Replacement, Motherboard: passo 4, immagine 1 di 1

    • Remove the Wi-Fi antenna element from the front plate.

    Traduci

  5. Zeki TBQG884B Motherboard Replacement: passo 5, immagine 1 di 1

    • Using the same screw driver as the previous step, unscrew the three screws shown.

    Traduci

  6. Zeki TBQG884B Motherboard Replacement: passo 6, immagine 1 di 1

    • Open the ZIF connector. It will look like a black locker, covering a wire ribbon. Then, remove the wire ribbon that connects the motherboard, and the screen.

    Traduci

  7. Zeki TBQG884B Motherboard Replacement: passo 7, immagine 1 di 1

    • Remove the other wire ribbon on the opposite side of the motherboard.

    Traduci

  8. Zeki TBQG884B Motherboard Replacement: passo 8, immagine 1 di 1

    • Now, remove the motherboard and replace it with a new one.

    • Be careful not to damage the battery, or the speaker wires. They are soldered onto the motherboard.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 12 altri collaboratori

Linlin Cai

Membro da: 09/16/15

317 Reputazione

1 Guida realizzata

Distintivi: 12

+9 altri distintivi

Team

IUPUI, Team 1-3, Harley Fall 2015 Membro di IUPUI, Team 1-3, Harley Fall 2015

IUPUI-HARLEY-F15S1G3

5 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 501