Aggiusta la tua roba Comunità Store

Xbox Series X|S Controller (Model 1914) Right Handle Cover Replacement

Introduzione

Use this guide to replace the right handle cover on your Xbox Series X|S Controller (model 1914).

Cosa ti serve

  1. Xbox Series X|S Controller (Model 1914) Right Handle Cover Replacement, Insert an opening tool: passo 1, immagine 1 di 3 Xbox Series X|S Controller (Model 1914) Right Handle Cover Replacement, Insert an opening tool: passo 1, immagine 2 di 3 Xbox Series X|S Controller (Model 1914) Right Handle Cover Replacement, Insert an opening tool: passo 1, immagine 3 di 3

    • Insert an opening tool between the right handle cover and the bottom inner edge of the back housing.

    Modifica

  3. Xbox Series X|S Controller (Model 1914) Right Handle Cover Replacement, Release the right handle cover clips: passo 2, immagine 1 di 3 Xbox Series X|S Controller (Model 1914) Right Handle Cover Replacement, Release the right handle cover clips: passo 2, immagine 2 di 3 Xbox Series X|S Controller (Model 1914) Right Handle Cover Replacement, Release the right handle cover clips: passo 2, immagine 3 di 3

    • Strong plastic clips secure the handle cover. Significant force is required to release them.

    • Slide the opening tool along the inner edge of the right handle cover and pry intermittently to release the plastic clips.

    Modifica

  4. Xbox Series X|S Controller (Model 1914) Right Handle Cover Replacement, Remove the right handle cover: passo 3, immagine 1 di 3 Xbox Series X|S Controller (Model 1914) Right Handle Cover Replacement, Remove the right handle cover: passo 3, immagine 2 di 3 Xbox Series X|S Controller (Model 1914) Right Handle Cover Replacement, Remove the right handle cover: passo 3, immagine 3 di 3

    • The plastic clips on the outer edge make it difficult to slide along it and release the clips. Therefore, prying up on the inner edge is the easier option.

    • Pry up the middle inner edge of the handle cover with the opening tool to release the remaining clips.

    • Place a finger on top of the handle cover to prevent it from being forcefully ejected.

    • Remove the right handle cover.

    • To reinstall the right handle cover, position it on the back housing and press down firmly along the edges to engage all of the clips.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Autore

Manuel Haeussermann

Membro da: 07/13/22

15.547 Reputazione

71 Guide realizzate

Distintivi: 32

+29 altri distintivi

Team

iFixit Membro di iFixit

Staff

135 Membri

17.125 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 49

Tutti i Tempi: 684