Salta al contenuto principale

VTech Learning Tunes Karaoke Volume Switch Replacement

Cosa ti serve

  1. VTech Learning Tunes Karaoke Volume Switch Replacement, Volume Switch: passo 1, immagine 1 di 1
    • To remove the battery door, loosen the screw using a Flathead screwdriver.

    • A coin can also be used to loosen the screw.

  2. VTech Learning Tunes Karaoke Volume Switch Replacement: passo 2, immagine 1 di 2 VTech Learning Tunes Karaoke Volume Switch Replacement: passo 2, immagine 2 di 2
    • Remove the battery door and take out the batteries.

  3. VTech Learning Tunes Karaoke Volume Switch Replacement: passo 3, immagine 1 di 1
    • Remove the six 9.5 mm Phillips #2 screws.

    • Remove the six 6.0 mm Phillips #2 screws.

  4. VTech Learning Tunes Karaoke Volume Switch Replacement: passo 4, immagine 1 di 2 VTech Learning Tunes Karaoke Volume Switch Replacement: passo 4, immagine 2 di 2
    • Gently pull up on the rear panel.

    • Be careful to not pull on the wire connections.

    • Gently place the back panel underneath the top panel with the tops facing each other, as shown in the picture.

  5. VTech Learning Tunes Karaoke Volume Switch Replacement: passo 5, immagine 1 di 2 VTech Learning Tunes Karaoke Volume Switch Replacement: passo 5, immagine 2 di 2
    • Using a Phillips PH1 screwdriver, remove the two 7.9 mm volume switch board screws.

  6. VTech Learning Tunes Karaoke Volume Switch Replacement: passo 6, immagine 1 di 1
    • Once the screws have been removed, carefully move the volume switch board.

  7. VTech Learning Tunes Karaoke Volume Switch Replacement: passo 7, immagine 1 di 1
Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

USF Tampa, Team 7-2, Cheng Spring 2016 Membro di USF Tampa, Team 7-2, Cheng Spring 2016

USFT-CHENG-S16S7G2

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 7

Tutti i Tempi: 263