Introduzione
Se devi sostituire il piedistallo del tuo Microsoft Surface Pro 6, questa guida ti mostrerà come fare.
Il piedistallo è la parte del tablet che gli permette di stare in piedi. Se si rompe o viene danneggiato, potresti volerlo sostituire. È possibile che il tuo piedistallo diventi instabile dopo un lungo utilizzo o se lo fai cadere. La riparazione non è difficile, e non dovrai smontare il Surface Pro 6. Dovrai solo rimuovere e sostituire il piedistallo.
Cosa ti serve
-
-
Svita le quattro viti Torx T3 da 2,7 mm, due su ogni lato del piedistallo.
-
-
Per rimontare il tuo dispositivo, segui le istruzioni in ordine inverso.
Per rimontare il tuo dispositivo, segui le istruzioni in ordine inverso.
Annulla: non ho completato questa guida.
Altre 7 persone hanno completato questa guida.
Un ringraziamento speciale a questi traduttori:
100%
Daniele Carminati ci sta aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›
7 Commenti
Any way to replace the hinges themself?
Also trying to find this out.
Thank you so much. I use the Surface 6 in portrait mode to read and use the kickstand as a grip/hand rest to prevent wrist strain. This meant the screws came loose constantly and I had to try and tighten them using my fingertip; not ideal. With the newly purchased Manta kit, and this guide, they are properly tightened again for the first time in over a year.
If you find that that the kickstand screws are still coming loose, I suggest applying a dab of blue Loctite (or nail polish if in a pinch) to the screws to help them hold in place.
The hinge mechanism has come completely loose so that the stand will not glide back into position. I thought it was the adhesive pads keeping it in place. Reading the instructions above, I now see that these pads can be put back into position. There is a whole Youtube showing the headaches of this kickstand hinge situation. The best bet is to buy a cover with a kickstand attached.