Aggiusta la tua roba Unisciti alla community Store

Sony a7 Rear Disassembly Replacement

Introduzione

This is a pre-requisite list of steps that will act as a placeholder for all other applicable guides pertaining to the Sony a7.

Cosa ti serve

  1. Sony a7 Rear Disassembly Replacement, Rear Disassembly: passo 1, immagine 1 di 1

    • Remove the eyepiece cover by removing the four M1.5x4mm screws with a PH00 Phillips screwdriver.

    • Remove the M1.5x4mm screw that retains the adjustment wheel with a PH00 Phillips screwdriver.

    Modifica

  2. Sony a7 Rear Disassembly Replacement: passo 2, immagine 1 di 3 Sony a7 Rear Disassembly Replacement: passo 2, immagine 2 di 3 Sony a7 Rear Disassembly Replacement: passo 2, immagine 3 di 3

    • Remove the six M1.5x4mm screws with a PH00 Phillips screwdriver.

    Modifica

  3. Sony a7 Rear Disassembly Replacement: passo 3, immagine 1 di 1

    • Remove one M1.5x4mm screw with a PH00 Phillips screwdriver.

    Modifica

  4. Sony a7 Rear Disassembly Replacement: passo 4, immagine 1 di 2 Sony a7 Rear Disassembly Replacement: passo 4, immagine 2 di 2

    • Remove the four M 1.5x2mm screws.

    Modifica

  6. Sony a7 Rear Disassembly Replacement: passo 5, immagine 1 di 3 Sony a7 Rear Disassembly Replacement: passo 5, immagine 2 di 3 Sony a7 Rear Disassembly Replacement: passo 5, immagine 3 di 3

    • Once the screws have been removed, unsnap and lift the rear plastic cover off of the camera.

    Modifica

  7. Sony a7 Rear Disassembly Replacement: passo 6, immagine 1 di 1

    • Using the blunt tweezers, remove the blue ribbon cable.

    • For additional guidance and tips on how to properly attach and detach connector cables, please reference iFixit's guide to connector cables here.

    Modifica

  8. Sony a7 Rear Disassembly Replacement: passo 7, immagine 1 di 2 Sony a7 Rear Disassembly Replacement: passo 7, immagine 2 di 2

    • Place the tweezers on the side of the circuit board and lift it from underneath so as to free it from the three retaining tabs.

    Modifica

  9. Sony a7 Rear Disassembly Replacement: passo 8, immagine 1 di 3 Sony a7 Rear Disassembly Replacement: passo 8, immagine 2 di 3 Sony a7 Rear Disassembly Replacement: passo 8, immagine 3 di 3

    • Remove four M1.5x4mm screws using a PH00 Phillips screwdriver.

    Modifica

  10. Sony a7 Rear Disassembly Replacement: passo 9, immagine 1 di 1

    • Lift the metal plate and LCD screen away from the camera body.

    Modifica

  11. Sony a7 Rear Disassembly Replacement: passo 10, immagine 1 di 1

    • Detach the amber ribbon cable from the motherboard.

    • For additional guidance and tips on how to properly attach and detach connector cables, please reference iFixit's guide to connector cables here.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 30

Ultimi 30 Giorni: 163

Tutti i Tempi: 5,017