Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
This guide will show you how to replace the earpiece speaker that no longer works.
Cosa ti serve
-
-
Heat along the edges of the back cover using a heat gun to soften the glue.
-
-
-
Carefully disconnect the battery from the logic board by using the plastic spudger as a lever.
-
-
-
-
Unscrew the four screws on the corners of the back frame using the JIS #00 screwdriver.
-
-
-
Remove the square rubber gasket from the camera using the plastic spudger.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.