Salta al contenuto principale

Introduzione

Questa guida ti mostrerà come risolvere la GLOD.

  1. Mentre la PS3 è accesa (LED verde acceso), metti la PS3 in standby (LED rosso acceso) tenendo premuto il tasto di accensione per 5 secondi.
    • Mentre la PS3 è accesa (LED verde acceso), metti la PS3 in standby (LED rosso acceso) tenendo premuto il tasto di accensione per 5 secondi.

  2. Dopo che la Ps3 è entrata in standby, tieni premuto il tasto di accensione finché non senti un segnale acustico per 2 o 3 volte, quindi rilascia il tasto.
    • Dopo che la Ps3 è entrata in standby, tieni premuto il tasto di accensione finché non senti un segnale acustico per 2 o 3 volte, quindi rilascia il tasto.

    about 2 or 3, which is it, or which is it supposed to be? I can get the two beeps and once i thought i heard three...i'm thinking 3 is the reset, but the system won't do it.?

    athirdbaseman - Replica

    i held that button down for a min or two i got one beep and it came on but still a black screen and iv done this over and over are there any known causes of this issue?

    Roger Leclerc - Replica

    My son was playing mine and the screen became all pixelated with white lines.

    My understanding as I did find a YouTube video that shows the same thing as mine did. Is that the gpu hasn't went bad but needs to be reflowed or reballed.

    I would tell you if it worked or not but when I was putting it back together I broke off the clip on the motherboard that the ribbon cable plugs into from the eject and on and off board.

    So my recommendation would be try a reflow.

    Eric Spurlock -

    I didn't get any 2/3 beeps.

    MUHAMMED MUZAMMIL THAYYIL - Replica

  3. Questa procedura resetterà le impostazioni video a quelle più basse e, quando accendi la PS3 con un cavo HDMI o PS3 AV collegato, rieseguirà la procedura di impostazione e vedrai un'immagine sulla tua TV.
    • Questa procedura resetterà le impostazioni video a quelle più basse e, quando accendi la PS3 con un cavo HDMI o PS3 AV collegato, rieseguirà la procedura di impostazione e vedrai un'immagine sulla tua TV.

    Nope hasn't worked

    Jordan Eveson - Replica

    Doing the first two steps brought me to a black screen (Safe Mode) with six options:

    1. Restart System

    2. Restore Default Settings

    3. Restore File System

    4. Rebuild Database

    5. Restore PS3 System

    6. System Update

    Kev B. - Replica

    going into recovery mode is not the solution for the glod you must get the rsx video chip reflowed or reballed

    warmaster1000 - Replica

    it worked for me but it stayed on the green wavy screen and didn’t do anything else

    greatbig billy - Replica

Linea Traguardo

Altre 70 persone hanno completato questa guida.

Un ringraziamento speciale a questi traduttori:

en it

100%

Daniele Carminati ci sta aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

Tim Gelvin

Membro da: 02/11/2010

4.300 Reputazione

1 Guida realizzata

Team

Master Techs Membro di Master Techs

Community

297 Membri

982 Guide realizzate

I have tried this multiple times, even took up a few hints about removing the HDD and putting it back in, and then trying.... it still did not work.... does any one have any idea of how to REALLY fix this?!

codylawinger - Replica

Yo need to change the Hard Drive, the problem from the Green Light its almost the 90% a HDD that is corrupted or broken. Put the HDD in your PC and format the HDD, then put it back on your PS3 and plug a USB with the latest update for the PS3 it will ask you for the update before format the HDD. Just do what it says on the screen.

PS: Also a easy way to know that its a HDD failure its just removing the HDD and turn on the console, you will get a warning image saying that there is no Hard Drive on the console.

Santiago Pescador -

does not work for me i have a slim model. still striving to find a solution.

krn - Replica

I have also been searching endlessly for a solution to this problem for my CECH-2001A model PS3 Slim. The majority of the time my system turns on with the GLOD. The rest of the time it works perfectly. I've tried safe mode and went through all the steps numerous times. I've also tried three different hard drives, two different HDMI cables and two different tv's. None of which alleviate the problem. I've also replaced the thermal paste and am religious with keeping it dust free. The only other solution I've found is that the RSX may be the culprit. Other than that, I'm at a loss.

David - Replica

I put put my ps3 motherboard in the oven at 400 degrees for 10 minutes let's see if it works lol

XLS Gaming -

This does not work for me. I get one beep (on) then one beep (off) then it goes red. I have a CECHL01 model. Still no video. Will a reflow also help HDMI loss?

James - Replica

Got one too.

Kajus Slekys -

aww man it did not work for me

StevenSon654 Gaming Channel - Replica

I pressed the Power button for 5 sec every &&^&^$^ time and nothing happen plz help meh lor gabe!

kenanauberger - Replica

Nope didn't work as usual.... Why does Sony have to be complicated I'm pretty sure it's got to be more than this...

traveen kavith - Replica

i've tried so many times by switch off and beep 3 times swithc onn...and finally by doing this my hard disk failed. i just baught new hdd but still the same. HDMI not working. god

bharani - Replica

Now what to do when it got on the safe mode?

Rahul Mohabir - Replica

RSX reflow, the solder joints could be cracked on the GPU. This is a video reset.

Brian Kohls - Replica

Can put some coins (with only some copper) with up the rsx chip and back works fine.

With better length.

Fábio Santos - Replica

Hi all.

Has anyone actually found a working solution for this problem ?

My ' Fat ' PS3 has the exact same problem,no video or sound.

My PS3 boots up as normal,and sounds normal,but no sound or video through the HDMI,and the same with the original AV cable.???

Cheers

Colin - Replica

Maybe I can help you

Alex Cela -

After you get through this, when you see the options.

Which one should I choose?

majorosbence01 - Replica

Guys maybe I found how to fix

Alex Cela - Replica

what is it??

kenneth soto -

Any chance ,how can you help with the GLOD

James Dobies -

Please send your suggestion on the GLOD for Fat PS3

James Dobies -

hi there I notice anybody on here is trying to fix their playstation 3 themselves but my suggestion is not going to sony and get it shipped out and pay over 200 hundred dollars!there is another way click on this link and hopefully this may help you.good luck! '''http://tinyurl.com/ycalqnf4'''

Ricu Martini - Replica

I have a December 2006 FAT PS3 and no help still no vid

Lagercat - Replica

Hlo i also have problem using pc i formatee HDD and putted in ps3 and when i turned on ps3 it shows green light 4 seconds and showing there is no light on the ps3 then i press once more then showing red light what can i do plss help me pla

Naeem - Replica

Plss help me i formated the HDD and putted it in ps3 and i presses the button amd showed green light only4 seconds and in screen nothing and there is no light and i pressed the button showing red light plss help me fast

Naeem - Replica

I just put my ps3 motherboard in the oven let's see if it works I put it at 400 degrees in for 10 minutes and 30 minutes to cool let's see if this fixes the green light of death I know this method will fix ylod but I have never tried it with Glod. God willing it works

XLS Gaming - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 22

Ultimi 7 Giorni: 174

Ultimi 30 Giorni: 786

Tutti i Tempi: 135,863