Salta al contenuto principale

Samsung WB1100F Camera Flash Replacement

Cosa ti serve

  1. Samsung WB1100F Camera Flash Replacement, LCD Screen Cover: passo 1, immagine 1 di 2 Samsung WB1100F Camera Flash Replacement, LCD Screen Cover: passo 1, immagine 2 di 2
    • Remove six 1.2 mm Phillips #00 screws connected to the tripod dock and adjacent screws.

    • Remove six 1.2 mm Phillips #00 screws from the side of the camera.

  2. Samsung WB1100F Camera Flash Replacement: passo 2, immagine 1 di 2 Samsung WB1100F Camera Flash Replacement: passo 2, immagine 2 di 2
    • Use a plastic opening tool or spudger if available.

    • Using the flat end of a spudger, loosen the connection between the back panel and the device. Remove the back panel using your hands.

  3. Samsung WB1100F Camera Flash Replacement, Camera Flash: passo 3, immagine 1 di 3 Samsung WB1100F Camera Flash Replacement, Camera Flash: passo 3, immagine 2 di 3 Samsung WB1100F Camera Flash Replacement, Camera Flash: passo 3, immagine 3 di 3
    • Remove four 1.2 mm Phillips #00 screws from the top panel.

  4. Samsung WB1100F Camera Flash Replacement: passo 4, immagine 1 di 1
    • Using the flat end of a spudger, loosen the connection between the top panel and the device. Remove the top panel using your hands.

  5. Samsung WB1100F Camera Flash Replacement: passo 5, immagine 1 di 1
    • Remove four 1.2 mm Phillips #00 screws from the flash assembly

  6. Samsung WB1100F Camera Flash Replacement: passo 6, immagine 1 di 1
    • Using your hands, remove the flash assembly. This should not require much force.

  7. Samsung WB1100F Camera Flash Replacement: passo 7, immagine 1 di 2 Samsung WB1100F Camera Flash Replacement: passo 7, immagine 2 di 2
    • Using your hands, remove the top flash panel by pressuring down on the back to release a locking tab.

  8. Samsung WB1100F Camera Flash Replacement: passo 8, immagine 1 di 1
    • Desolder three wires on the flash assembly.

  9. Samsung WB1100F Camera Flash Replacement: passo 9, immagine 1 di 1
    • Gently remove the flash assembly from the body.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jesse Lindsey

Membro da: 05/13/16

581 Reputazione

5 Guide realizzate

Team

Metro State, Team 1-1, Carpenter SU 2016 Membro di Metro State, Team 1-1, Carpenter SU 2016

MSU-CARPENTER-SU16S1G1

3 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 15

Tutti i Tempi: 561