Aggiusta la tua roba Comunità Store

Samsung RF28R7201SG Refrigerator Door Sensors Replacement

Introduzione

This guide shows how to remove and replace the door sensors in your Samsung RF28R7201SG refrigerator.

The Samsung fridge uses a magnetic reed switch for each French door. If these sensors fail, the refrigerator will think a door is always open or closed.

Cosa ti serve

  1. Samsung RF28R7201SG Refrigerator Door Sensors Replacement, Unplug your refrigerator: passo 1, immagine 1 di 1

    • Unplug your refrigerator before you begin your repair.

    Modifica

  2. Samsung RF28R7201SG Refrigerator Door Sensors Replacement, Remove the hinge cover: passo 2, immagine 1 di 1

    • Use a Phillips screwdriver to remove the three 18.5 mm-long screws securing the hinge cover on the top of the refrigerator.

    Modifica

  3. Samsung RF28R7201SG Refrigerator Door Sensors Replacement: passo 3, immagine 1 di 1

    • Lift the edges of the hinge cover to loosen it from the refrigerator.

    • Don't try to fully remove the cover, as it's still attached to the refrigerator by a few cables.

    • Flip the hinge cover over to access the cables underneath.

    Modifica

  5. Samsung RF28R7201SG Refrigerator Door Sensors Replacement: passo 4, immagine 1 di 2 Samsung RF28R7201SG Refrigerator Door Sensors Replacement: passo 4, immagine 2 di 2

    • Use your fingers to squeeze and disconnect the blue wire connector.

    • Use your fingers to squeeze and disconnect the white wire connector.

    Modifica

  6. Samsung RF28R7201SG Refrigerator Door Sensors Replacement: passo 5, immagine 1 di 1

    • Remove the hinge cover.

    Modifica

  7. Samsung RF28R7201SG Refrigerator Door Sensors Replacement, Sensor information: passo 6, immagine 1 di 2 Samsung RF28R7201SG Refrigerator Door Sensors Replacement, Sensor information: passo 6, immagine 2 di 2

    • The hinge cover has two door sensors:

    • The left door sensor

    • The left door sensor connector

    • The right door sensor

    • The right door sensor connector

    • Depending on your situation, you may need to replace either or both sensors.

    Modifica

  8. Samsung RF28R7201SG Refrigerator Door Sensors Replacement, Remove the sensor: passo 7, immagine 1 di 2 Samsung RF28R7201SG Refrigerator Door Sensors Replacement, Remove the sensor: passo 7, immagine 2 di 2

    • Use your fingers to squeeze and disconnect the sensor cable connector.

    Modifica

  9. Samsung RF28R7201SG Refrigerator Door Sensors Replacement: passo 8, immagine 1 di 2 Samsung RF28R7201SG Refrigerator Door Sensors Replacement: passo 8, immagine 2 di 2

    • Use a spudger or a flathead screwdriver to pry the sensor out of its retaining clips.

    Modifica

  10. Samsung RF28R7201SG Refrigerator Door Sensors Replacement: passo 9, immagine 1 di 1

    • Remove the door sensor.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Ask our Answers community for help.

Autore

con 2 altri collaboratori

nicO

Membro da: 04/14/15

15.927 Reputazione

88 Guide realizzate

Distintivi: 36

+33 altri distintivi

Team

Global Fixers Membro di Global Fixers

Community

33 Membri

572 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 18

Tutti i Tempi: 160