Salta al contenuto principale

Samsung Galaxy S Blaze Volume Rocker Replacement

Cosa ti serve

  1. Samsung Galaxy S Blaze Volume Rocker  Replacement, Volume Rocker: passo 1, immagine 1 di 1
    • Start by removing the back plate to expose the battery by pulling the back and front plates apart.

  2. Samsung Galaxy S Blaze Volume Rocker  Replacement: passo 2, immagine 1 di 1
    • Remove the battery from the device and set aside.

  3. Samsung Galaxy S Blaze Volume Rocker  Replacement: passo 3, immagine 1 di 2 Samsung Galaxy S Blaze Volume Rocker  Replacement: passo 3, immagine 2 di 2
    • Using a Phillips Head Screwdriver size 00. Remove all eight 4mm screws from the frame.

    • The eight screws are all the same size.

  4. Samsung Galaxy S Blaze Volume Rocker  Replacement: passo 4, immagine 1 di 1
    • Remove the frame from the phone by prying it off with the iFixit blue plastic opening tool.

    • Work around the phone with the tool until the frame is off.

    • You may need to use a bit of force to pry off the frame.

  5. Samsung Galaxy S Blaze Volume Rocker  Replacement: passo 5, immagine 1 di 2 Samsung Galaxy S Blaze Volume Rocker  Replacement: passo 5, immagine 2 di 2
    • The volume rocker is held into the frame by two small prongs.

    • Carefully unhook the prongs from the frame by pulling to the side and remove the volume rocker.

    • The prongs on the volume rocker look like this.

Conclusione

To reassemble your device, follow these instructions in reverse order.

If there is something wrong with your device, try this: Samsung Galaxy S Blaze 4G Troubleshooting

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 13

Tutti i Tempi: 296