Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Samsung Droid Charge SIM Card Port Replacement

Introduzione

This guide will show you how to remove your current SIM card port/slot and replace it with a new one.

Cosa ti serve

  1. Samsung Droid Charge SIM Card Port Replacement, Rear Cover: passo 1, immagine 1 di 1

    • Open up the back case on the phone from the groove in the bottom of the phone.

    • You can do this by inserting a fingernail or similarly thin object into the groove and pulling up with mild force.

    Traduci

  2. Samsung Droid Charge SIM Card Port Replacement, Battery: passo 2, immagine 1 di 1

    • Below the left part of the bottom of the battery area there will be a groove large enough to fit in a finger or screw driver head.

    • Use the groove to lever out the battery gently, in order to not damage either the battery or phone. Store the battery in a safe place.

    Traduci

  3. Samsung Droid Charge SIM Card Port Replacement, microSD: passo 3, immagine 1 di 1

    • Push the SD card further into its metal slot until you hear a click.

    • Release the card, and it should automatically eject itself.

    • Remove the SD card.

    Traduci

  5. Samsung Droid Charge SIM Card Port Replacement, SIM Card: passo 4, immagine 1 di 1

    • Slide the SIM card out of its casing by pushing on it and sliding it upward.

    Traduci

  6. Samsung Droid Charge SIM Card Port Replacement, SIM Card Port: passo 5, immagine 1 di 1

    • Carefully remove the back cover.

    • Locate the 7 small black screws located around the edge of the phone.

    • With a small philips head screwdriver, remove each of the screws, and place them in a secure location.

    Traduci

  7. Samsung Droid Charge SIM Card Port Replacement: passo 6, immagine 1 di 1

    • Removal of the back half of the casing.

    • Using a thin plastic flat head screw driver, or similar item. On the side of the phone insert the thin edge into the visible split between the 2 halves of the phone.

    • Use a prying motion to lift the casing up. This will separate the phone casing.

    • Repeat this motion all around the screen edge until the casing pops off.

    Traduci

  8. Samsung Droid Charge SIM Card Port Replacement: passo 7, immagine 1 di 1

    • Locate and release the volume button flex cable on the right.

    • Locate and release the pop connector on the motherboard located to the left of the SIM card port.

    Traduci

  9. Samsung Droid Charge SIM Card Port Replacement: passo 8, immagine 1 di 2 Samsung Droid Charge SIM Card Port Replacement: passo 8, immagine 2 di 2

    • Your SIM card port is now unattached.

    • Remove SIM card port from motherboard.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Autore

con 12 altri collaboratori

Lucas Carter

Membro da: 09/27/12

172 Reputazione

1 Guida realizzata

Distintivi: 9

+6 altri distintivi

Team

Cal Poly, Team 15-44, Forte Fall 2012 Membro di Cal Poly, Team 15-44, Forte Fall 2012

CPSU-FORTE-F12S15G44

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 14

Tutti i Tempi: 2,353