Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Open up the back case on the phone from the groove in the bottom of the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the groove to lever out the battery gently, in order to not damage either the battery or phone. Store the battery in a safe place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Push the SD card further into its metal slot until you hear a click.
-
Release the card, and it should automatically eject itself.
-
Remove the SD card.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the SIM card out of its casing by pushing on it and sliding it upward.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully remove the back cover.
-
Remove the two 5mm screws with a small Phillips head screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Removal of the back half of the casing.
-
Using a thin plastic flat head screw driver, or similar item. On the side of the phone insert the thin edge into the visible split between the 2 halves of the phone.
-
Use a prying motion to lift the casing up. This will separate the phone casing.
-
Repeat this motion all around the screen edge until the casing pops off.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Release the volume button flex cable on the right.
-
Release the pop connector on the motherboard located to the left of the SIM card port.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Your SIM card port is now unattached.
-
Remove SIM card port from motherboard.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.